The FauxFire® Simulated Fake Fire System effect is not generally sold for outdoor applications because there is usually limited control over air currents (wind) and ambient light levels. However, the system can be utilized outdoors at night, if the conditions are controlled. A FauxFire® Simulated Fake Fire System effect can be created as a segmented arc or circle, using Technifex Products standard straight appliances, within the limits of the required space. It must be noted that there may be gaps in the flame effect in this configuration. There are methods for dealing with this, which we can suggest on a case-by-case basis. Is the FauxFire effect viewable from both sides? EASY TO USE】--LED desk flame lamp does not need battery power supply. Simply take out the flame lamp from the box and place it on the mounting seat you want, insert the 110V plug into the corresponding slot, and Can produce realistic burning flames. This marvellously realistic fire effect comes built into either a retro 1950s TV or a modern flat-screen display.

All of our plug-in flamelights can also be battery operated and used as table centres or as stage props, such as in fireplaces or as hand-held torches. With LUXA you’ll be in good company! The FauxFire appliances should be placed such that guests will not be able to see the equipment that produces the effect. That being said, the equipment can be placed in a trough below floor level such that the FauxFire appears to emanate at floor level. The base to the equipment can be surrounded with a low wall or other scenic, as long as a minimum 6″air gap is maintained to allow forproper ventilation. Are there other usage considerations? Regarding steam delivery pressure, FauxFire appliances are designed to operate properly with 90 psi at the steam stub-up location.These magical lamps contain dozens of twinkling multi-coloured LEDs which project many coloured points of light onto surrounding surfaces. The boiler manufacturer representatives can, in most cases, help with the installation and startup of the system, and can provide operational and maintenance training. Though there are two forms of FauxFire systems, (smoke and steam) we generally sell the steam based system for permanent and long term applications due to the ease of service, reliable nature of boiler systems and the fact that steam is a water based product. The smoke version is oil based (Propylene Glycol) and is generally used for short term applications such as trade shows and special events. Are there equipment options available? Plumbing and electrical wiring required by the FauxFire appliances, between the equipment space and the appliance location is usually furnished and installed, to Technifex’s specifications, by facility contractors who are hired by the client or project owner. The service runs installed by the facility contractor should also include the steam piping and condensate drain lines.

ENERGY SAVING & PORTABLE】--The artificial effect light has low power consumption, stable lighting performance and long service life. Base diameter: 12cm/4.7in, base height: 10cm/3.93in, flame height: 13cm/5.1in. The lightweight and compact design makes it easy to carry and store in a cabinet. Dual solenoid-operated valves and manual adjusting valves for creating three operating flame heights (high/medium/low) under electrical control.Extra animation blowers, which are sometimes needed when Faux Fire appliances are arranged in a curve or circle.