Touch dry in an hour, Hammerite gives long-lasting protection and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. If the metal has already been previously coated, then wash down thoroughly with diluted detergent, rinse with clean water and allow to dry. Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. Acting as a primer, undercoat and top-coat all in one the aerosol delivers an even coverage that can be applied directly to rust with minimal effort (just brush off loose debris to prepare the surface for application).

Hammerite Direct to Rust Metal Paint Aerosol Smooth Finish is specially formulated to perform as primer, undercoat and topcoat in one.

Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes.

Hammerite Paint is specially formulated to be applied directly onto rusty metal with minimal surface preparation. Paint a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour. Apply direct to rust Protects for up to 5 years No primer or undercoat required For metal inside and outside the home. Due to the limitations of on-screen representation and variations in individual monitor settings, the exact pattern, colours and shades may vary from those shown. Some cookies are essential to the functioning of this site whereas others are non-essential but help us provide a better browsing experience.For optimum results, it is advised that you test your chosen surface for compatibility, any reaction will occur within an hour, If a reaction is evident, remove all paint then wash down with degreaser and rinse with clean water and allow to dry. On bare zinc, aluminium and galvanised surfaces, apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.

Hammerite Direct to Rust Smooth metal paint provides outdoor metal surfaces with a glossy long lasting finish. If you do not give permission you may continue to use this site and only essential cookies will be set. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint. Ensure that you cover the surface beneath the metal object with a dust sheet to catch any spills or drips that may occur.

Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. If applying Hammerite Metal Paint to smooth metal surfaces, lightly abrade to achieve maximum adhesion. Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. A solvent based product, Hammerite can be easily applied directly onto rusty metal by either roller or paintbrush, with no primer or undercoat necessary, thanks to its special 3 in 1 formula - saving you both time and money.