With the introduction of the 3000 Series we have also advanced our award-winning Radio Frequency (RF) Wireless Interconnection and Data Monitoring technology. Expand your home’s fire alarm network with one clean smart home system. The Ei3000MRF SmartLINK Module enables you to set up a wireless alarm interconnection for up to 12 alarms in your home. Simply plug into any 3000 Series alarm. Proven Thermistor Heat Sensor, Optical Sensor and Electrochemical CO Sensor to provide the ultimate response, working independently and together. House Coding: this feature confines the RF communication to designated RF devices only, thus avoiding an inadvertent activation of the neighbouring alarm RF systems.

Ei3000MRF 3000 Series White Wireless SmartLINK Module Aico Ei3000MRF 3000 Series White Wireless SmartLINK Module

This is an optional add-on SmartLINK module for the Aico 3000 series of alarms to enable wireless interconnection with up to 12 SmartLINK and RadioLINK+ alarms and devices. It also facilitates a hybrid communication of hardwired and wireless connections. Add this module to any Ei3000 series alarm to enable SmartLINK interconnection and device data extraction SmartLINK enables real-time configurable notifications of alarm activations and events via a Gateway and Portal system for full visibility of your connected SmartLINK systems. The Ei3000MRF SmartLINK module can be fitted to any mains powered Alarm from the Ei3000 Series to enable them to be interconnected wirelessly to other devices. Approvals: RF performance to EN 300 220-1 in accordance with EN 300 220-2, EMC performance to EN 301 489-1 in accordance with EN 301 489-3

We’re Here To Help

The Ei3018 Carbon Monoxide Alarm has a high performance, proven electrochemical sensor to monitor Carbon Monoxide (CO) levels in the household. The sensor is individually calibrated and tested in Carbon Monoxide gas to ensure it is completely accurate in its detection. The Ei3000MRF module is a short range device using a transceiver to transmit, receive and repeat the RadioLINK RF protocol. This ensures a robust “mesh” of RF signals and reliable paths of communication. Aico highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From here you can identify which danger is present and the action you should take. The module simply plugs into the designated slot in the base of the Alarm head. On powering up the Alarm, the RF LED on the side of the Alarm will flash red, blue and green to indicate that the module has been fitted correctly.

Aico SmartLINK Ei3000MRF Wireless Module - Screwfix

The Ei3030 Fire & Carbon Monoxide Multi- Sensor Alarm is the latest edition to the technologically advanced 3000 Series. The new, simpler A-G energy rating scale is stricter and designed so that very few products are initially expected to achieve the top “A” rating.To add SmartLINK technology to your system, simply plug SmartLINK modules into any 3000 Series alarm head. The Remote Alarm Learn entry feature enables the installer to re-instate the full RF system house code from a single device. Additional devices can then be added to the system and coded accordingly. Remote Alarm Learn: this feature allows the installer to re-activate the entire RF system House Coding from just one device; additional devices can be added and house-coded accordingly. This is the Aico Ei3028 is a dual sensor alarm - Heat and Carbon Monoxide (CO) alarm. It contains a .. The alarm contains our tried and tested thermistor heat sensor and our proven electrochemical CO sensor, providing protection from both Fire and CO.

Ei3000MRF SmartLINK Module for Wireless Interconnection

Functions: when the Ei3000MRF is plugged in, you get wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway (Ei1000G) and Portal. This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user The Ei3000MRF Module allows for wireless interconnection and data extraction. Simply plug in to any 3000 Series alarm. RF Visual Indicator: Blue light flashes continuously for 0.5 to 3.5 seconds while transmitting RF signal The Ei3000MRF is a short range device which uses a transceiver to receive, transmit and repeat the RadioLINK RF communication protocol. This ensures a robust "mesh" of RF signals and reliable paths of communication. The integrated house coding feature restricts the RF communication to designated RF devices only which reduces interference / activation with other nearby RF systems.The house coding feature confines the RF communication to designated RF devices only, thereby avoiding the inadvertent activation of neighbouring Alarm RF systems. The Ei3000MRF is an optional add-on for use with the Ei3000 series of alarms. It enables wireless interconnection with up to 12 other SmartLINK / RadioLINK compatible devices and supports hybrid communication allowing for devices to be hardwired or wirelessly interlinked.

Ei3000MRF Instructions - Aico Ei3000MRF Instructions - Aico

Built-in intelligent dust compensation technology eliminating the risk of nuisance alarms from contamination. No external parts are left exposed as the small antenna is fully enclosed within the alarm unit once fitted. Once the alarm is powered up, the RF LED on the side of the alarm device will flash red, blue and green which indicates that the module is correctly fitted and operating. The new SmartLINK technology provides the same proven wireless interconnection technology as RadioLINK and RadioLINK+. It uses Radio Frequency signals and is completely compatible with both existing systems. This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automati.. The thermistor has a smaller thermal mass enabling it to give faster alarm responses when the trigger temperature of 58°C is reached.

Want to view product prices with or without VAT?

Features remote alarm learn entry, allows installer to reactivate the entire RF system house code from one device This is the Aico Ei3000MRF SmartLINK Module which allows for wireless interconnection and data extraction. You can simply plug in to any Aico 3000 Series alarms. This Aico Ei3000MRF is a short range device using a transceiver to transmit, receive and repeat the RadioLINK RF protocol. This ensures a robust “mesh” of RF signals and reliable paths of communication.