Makita built electronically controlled BL™ Brushless Motor delivers 6,300 RPM for maximum performance and 50% longer run time per charge Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating The rotary hammer can be used with a separate attachment and dust extractor (sold separately). The Rotary Hammer is AWS® capable with Auto-Start Wireless System, which utilizes Bluetooth® technology for wireless power-on/off communication between tool and equipped dust extractor. To activate AWS, simply install the Auto-Start Wireless Transmitter (198901-5, sold separately) and synchronize with an AWS-equipped dust extractor (XCV08, sold separately). Makita mitre saws offer the power and the drive you need to get a job done. Designed with precision and speed in mind they can handle even the most complicated cut. From a simple door frame, to a more complex crown moulding installation, you can count on Makita mitre saws to get the job done.

Charge times: 14.4/18V 3.0Ah battery in 60 mins 18V 4.0Ah battery in 90 mins 18V 5.0Ah battery in 110 minsTool users who unplug the cord with Makita 18V LXT® experience new levels of convenience, efficiency and productivity. Makita created the 18V Lithium-Ion cordless tool category in 2005, and today it is the world’s largest 18V cordless tool line-up. Makita’s leading technology gives tool users unmatched performance and breadth of line, with innovation in motor and battery technology that is obliterating industry standards – and leaving old thinking behind. With high amp-hour batteries, efficient brushed and brushless motors, and 36V (18V X2) LXT® technology, Makita 18V LXT® tools not only meet corded demands, they can exceed the performance of corded, all while remaining in a single cordless platform powered by the industry's fastest-charging 18V lithium-ion batteries. [Learn More] Built-in depth stop allows a preliminary first cut of 2 to 3mm to be performed prior to cutting through the entire material for clean and splinter-free cutting Anti-Vibration Technology (AVT®) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort

X2 LXT® technology delivers up to 140 1/2" x 2-3/8" holes per charge using two 18V LXT® 5.0Ah batteries (batteries not included) mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applicationsAuto-start Wireless System (AWS®) which utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor The new Makita 2.0Ah battery with a 30 minute fast charge time with a DC10SB charger or 70 minute standard charge time with a DC10WD charger.

Precise straight and 45º bevel cuts as the position of the blade enters the material on the same sight line when using a guide rail (sold separately) Compatible guide rail system (sold separately) interacts with the saw base to provide smooth, perfect, dead-on straight or bevel cutting Compact and lightweight battery charger designed to charge slide type lithium-ion batteries BL1011B, BL1021B and BL1016B. Charge Times: 2 x 14.4/18V 3.0Ah Batteries in 22 mins 2 x 18V 4.0Ah Batteries in 36 mins 2 x 18V 5.0Ah Batteries in 45 mins Slide lever on saw base designed to engage the optional guide rail (sold separately) when bevel cutting for stabilityLarge rear dust port directs material away from the operator and easily connects to a vacuum system The new Makita 4.0Ah battery with a 60 minute fast charge time with a DC10SB charger or 130 minute standard charge time with a DC10WD charger. The new Makita 1.5Ah battery with a 22 minute fast charge time with a DC10SB charger or 50 minute standard charge time with a DC10WD charger Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature (battery and charger sold separately) The Makita DSP600 Twin 18v (36v) LXT Brushless 165mm (6-1/2”) Plunge Circular Saw delivers precise and more accurate cutting when combined with the Makita guide rail system (sold separately). The saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful Makita-built brushless motor powered by two 18v LXT batteries with Automatic Torque Drive Technology (ADT) Technology, which adjusts cutting speed and torque during the cut for optimum performance.

Makita DSP600ZJ Twin 18v LXT Brushless Cordless Plunge Saw 165mm Body Only In Makpac Type 4 Carry Case Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions In 1958, they introduced their first power tool –a hand-operated electric planer. This proved to be a decisive point in the fortunes of Makita. A few months later, they released a hand-held chaser which began a trend that is still evident today as a specialist manufacturer of power tools.Automatic Torque Drive Technology (ADT) automatically changes the cutting speed according to load conditions for optimum operation It is ideal for a range of trades including mechanical/electrical/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-PLUS bits.