Marksman Edge. Suitable for all sizes of board, the Edge can be used when you don’t want any gap at all between your boards. When is a gap needed? Stainless Steel . These are recommended for use in areas where resistance against corrosion is important, for example, coastal areas and around swimming pools and water. Stainless Steel screws are only available as a 60mm option. Tip #4 : Release the Trigger Handle to set the tool in place. If it is placed properly, when the Trigger is released, the tool should clamp securely to the board. CAMO offers a Limited Lifetime Warrantythat guarantees against rust and corrosion for the life of the project. Wide Board Marksman Pro. Suitable for use with boards that are 126mm to 145mm wide, the Wide Board tool includes 5mm spacers on each side.

Start by squeezing the Trigger Handle and position the tool at least 25mm from the end of the board. Push the board so that it is against the previous one (a gap will be automatically created by the Spacer) and place screws into the Screw Guides.The great thing about the CAMO system is that you cannot overdrive it, because the depth is set automatically. This means that once the Driver Bits shoulder reaches the Screw Guide, you can stop. CAMO is a system, and each part has been engineered to work exclusively with other parts of it for the best performance. Using screws or tools from other brands may not produce the results you expect. Which CAMO Marksman Tool?

Narrow Board Marksman Pro. Suitable for use with boards that are 80mm to 125mm wide, the Narrow Board tool includes 5mm spacers on each side. When you read about smooth and grooved boards, in relation to CAMO, we are not talking about the top surface, but rather the edges of the boards, as shown in the image below: