The two bench boards are fixed horizontally, but the clamping edges are shaped to grip smaller items such as pipes or fastenings. We were looking for products that could fulfil a variety of DIY motoring tasks, such as holding a wheel for cleaning, grippin a pipe and providing a platform to hold a body panel.

Keter Folding Work Bench | Toolstation Keter Folding Work Bench | Toolstation

Yet once built, the Silverline does most jobs reasonably well, with horizontal-only clamping planks. The difference in capacity is massive - if they were closer, then it may be a reasonable assumption that they could be, but to me, from what is online, they may be different build specs. The “step” is useful for steadying the bench while sawing and can be used to work on taller parts, such as the top of a body panel. These are almost universally known by the name of the original – the Workmate – which was invented in the 1960s by a Ford and Lotus engineer.We couldn’t find a workbench any cheaper than the TB01, so as you might expect, it’s free of frills and requires about 30 minutes of assembly time. Not all of us have the garage space for a full, fixed bench with a vice, but you can still find a decent compromise with a folding version. Mine have had a hard life and they still function although one of them has sagged a little in the middle so that it's no longer flat. It feels solid and stable too, and has a decent 150kg load capacity, which should be enough for a small engine.

mac allister folding table vs keter folding table | Talk mac allister folding table vs keter folding table | Talk

A 120kg maximum load capacity isn’t the most generous, but it should be enough for most automotive tasks. The clamps are low quality, interchangeable and the bench sizes seem the same but I've never actually measured them. At first glance the Clarke bench looks similar to our winning Workmate, with legs that can be deployed or folded to give two possible working heights.The work surface boards are fixed horizontally, but the faces of the jaws are shaped to let them grip small, rounded items such as pipes and bolts.

Mac Allister Multicolour Foldable Folding Workbench (H: 755mm

Please refer to publicly filed documents with the Security Exchange Commission, which can also be found at https://investor. stone is less than 100 kilogrammes in french, so while these benches will support a surprising amount spread out, they don't take point loads so well. To save costs it comes as a big bag of bits, so you’ll need to do about 40 minutes of assembly yourself, but once built you are left with a pretty basic – and small – bench.Folding and unfolding is a complicated process that involves putting legs into place and tightening knobs.

Mac Allister Parts | Partmaster Mac Allister Parts | Partmaster

Once you’ve finished working, the Draper collapses easily and folds almost flat to make storage easier. weight means it’s not too much effort to lift off a hook on a garage wall either – that’s less than half the weight of most other benches here.It is easy to use, and the size of the surfaces makes it much more useful for most automotive tasks. We tested how well they gripped a radiator hose while being cut, held a wheel while it was being wire brushed, and provided a platform to hold a differential. They are good value and useful for jobs which you don’t do often or won’t need anything too sophisticated, such as chisels and hammers.