It is depending the kettle size, never use even if the water is below the minimum line on the kettle window. Can I leave the remaining hot water after boiling in the kettle? The filter is made up of a grid that retains the particles of tartar. It is important to clean it regularly by brushing it or soaking it in a container with a descaling solution (diluted vinegar or citric acid). How do I clean the body of the kettle? The pull-off lid – a subtle nod to the past – makes for easy refilling, while two large water-level windows (one each side) let you know when it’s time for a top-up. A removable anti-scale filter ensures a cleaner kettle and cleaner water, while an automatic switch-off with indicator light provides added convenience. Robust, contemporary and full of character, the Tefal Avanti Classic kettle is the perfect match for today's modern kitchen. Plus, we guarantee that your Kettle will be repairable for 10 years. The integrated software manages the On/Off operation of the electronic board periodically when the water temperature exceeds at least 80°C. What should I do if my appliance is not working?

The internal parts may make noises with the change in temperature. There is nothing wrong with it. After boiling, there are drops of water on the power plate. Is that okay? Another important factor to consider is longevity. When you buy a high-quality TEFAL Avanti Classic KI290N40 Traditional Kettle, you’re making an investment that is likely to last longer. Cheaper products may seem like a good deal at the time, but they are often made with lower-quality materials and are not designed to last as long. This means that you may end up having to replace your device sooner, which can end up costing you more in the long run. Simply wipe the outside with a clean cloth (with a drop of vinegar if necessary) and descale the inside. Never use abrasive products, scouring powder, detergents or other maintenance products because they may discolour the plastic. Take care never to put the kettle, power cord plug or electrical base in water ! How do I descale my kettle?Immediately after boiling, the sensor that automatically turns the power off will be hot, and the power switch may not operate. Wait until the sensor has cooled and then try again. After removing the electrostatic film, there are white marks on the LCD screen when the kettle is first plugged in (depending on the model). Descale regularly, preferably at least once a month and more often if you live in a very hard water area. Do not leave the power cord hanging over the edge of a table or work surface to avoid any risk of the kettle falling.

You may have overfilled the kettle causing water to either leak down the outsides of the kettle when boiling or water to get into the internal steam vent which means water will appear at the base of the kettle on the work surface. Only ever fill your kettle up to the Maximum mark. Also the condensation on the lid may have dripped down on to the work surface. The cord won't come out. If the resistance or the heating element is scaled, the heat produced is only partially transferred to the water for heating. On the other hand, scale favours the appearance of rust. Technical support Why does my kettle switch off before it has boiled? Yes: never rub the heating element with a cloth or any abrasive material. Descaling is quite enough to clean it. How can I clean the scale filter in my kettle? It may look like there is more space for water, but if you put in over the maximum it was designed for, it may leak when the water boils. Please do not overfill the kettle. What is the minimum amount I can boil in ml?Electric kettles are designed to turn off when they sense steam. This steam may condense and drops of water may fall from the bottom of the handle. This is not a fault. It will also not cause any fault with your kettle. The power switch doesn't work. Easy To Use Kettle: Retro-style jug with precise spout and pull-off lid for easy refilling and dual water-level windows to know how much water you need. The large 1.7L capacity will be enough for the family. The bodies of stainless steel kettle are made of food-grade stainless steel (SUS304). Where can I dispose of my appliance at the end of its life span? If so, please take your kettle to an authorised repairer. What should I be careful about when using my kettle? Do not place the kettle near a window as the plastic parts can be discoloured by sunlight. Why does the kettle wobble slightly on the base?

The bodies of plastic kettle are made of food-grade polypropylene (PP). Which material is used for the body of stainless steel kettles?Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre. Various topics [Not for BR3xx models] Why does the water taste of plastic In kettles with a plastic tank? Always be aware while the appliance is operating, paying special attention to the steam coming out of the spout, which is very hot.