Máy ghi âm JXD 750i mini dung lượng 16GB,Ghi âm liên tục lên tới 715 giờ – Tự ghi âm thông minh lọc âm tốt BH 12 tháng type ~/wifichanges/wireless-regdb-2013.02.13#leafpad '/root/wifichanges/wireless-regdb-2013.02.13/db.txt' Would WUS036NHA card be recognized in Kali Linux using a USB pendirve instead of VM? It doesn’t have to light up at boot time, just be ready (green)I when I start Network Manager. Increased Bandwidth, More Applications AWUS036NHA supports Max. 150Mbps 2.4GHz wireless access. Making it ideal for large traffic and lag-free HD video streaming for more devices in your living space. Once I put the device properly in monitor mode, then I ran airodump! root@kali: ~# airodump-ng wlan0mon

New Alfa AWUS036NHA, Configuring for Kali, and Scanning New Alfa AWUS036NHA, Configuring for Kali, and Scanning

This is a single band (2.4 GHz) 802.11n adapter with maximum transfer speeds of 150 megabits per second (mbps). This is for one brand new (in retail box) AWUS036NHA wireless adapter with USB cable 5 dBi gain antenna, and installation CD. Some ALFA models include a bonus mount accessory, this one does not. I thought that maybe it didn't have the right drivers so i tried to apt-get install firmware-atheros but it said that it was already installed. I highly..::.. advise doing this in a VM till someone who knows more about this than I do can confirm it wont break anything in future. The signal strengths I see with the HA are typically not as strong as what I see with the H. However, this can be misleading since the driver that the manufacturer writes controls this value, and from working on the 8187l driver, I know that it tends to be a bit optimistic. So this in itself is not really too important. They both saw about the same networks. There was some variation at times, with the H tending to see a few more. Again, this fact alone is not that important however, but consumers tend to like devices that show lots of networks, even if they can’t connect to them J.

i here put a simple list of commands before starting penetration testing - (i assume that you are using 2 network cards) Since AWUS036NHA supports injections, make sure you are more close (use a better antenna ) usb 2-2: ath9k_htc: USB layer deinitialized apt remove firmware-atheros

get Alfa awus036nha to work with Kali Linux? How to get Alfa awus036nha to work with Kali Linux?

Khuyến mại jry₪multi-point music adapter splitter receiver wireless bluetooth audio transmitter giá rẻ

i tried it again, and now this is working for me, did it on a normal boot not in a VM, thanks for the help bro First, sorry for your comment not showing up initially. I manually approve/reject posts to prevent spam even further, which is why this is just now showing up. iwconfig wlan(x) txpower 30 - This is the command that sets txpower and 30 is the highest you'll get

Alfa AWUS036NHA Atheros AR9271 Wireless B/G/N USB Adapter Alfa AWUS036NHA Atheros AR9271 Wireless B/G/N USB Adapter

https://www.cisco.com/assets/sol/sb/WAP371_Emulators/WAP371_Emulator_v1-0-1-3/help/Apx_ReasonCodes2.html I connected both the H and the HA to an Engenius AP so I could monitor the signal level of both devices. This AP is about ¾ mile from me, and I am using just the standard 5db rubber antenna’s that ship with each unit. wifichanges/wireless-regdb-2013.02.13#make what we want to do here is after the folder is cd just type make Oh really? That is pretty interesting, I wonder why CTS would prevent that, as it should just prevent the collisions.

Device

It should be recognized just fine using a pen-drive, and you should have even less issues than passing it through a VM Superior Wi-Fi Performance Equipped with wide-coverage wireless capability, and years of field-proven experiences, ALFA AWUS036NHA provides 2.4GHz 150Mbps Wi-Fi data transfer speeds for outstanding peformance.

AWUS036NHA - ALFA Network Docs

If it’s a WPA(2) network, then you should be fine. If it’s WEP, then you will need to fake authentication before performing your Deauth. This adapter is only for 2.4ghz and it has a sma connector. This usb wifi card is compatible with 802.11g or 802.11n, mimo and supports data rate up to 150 mbps. I just did a fresh install of windows 10, and had an awful time getting my usb adaptor (ALFA AWUS036NHA with the Atheros AR9271 Chipset) to work on it.The H was typically giving a signal strength, on the Engenius AP, of around -73 to -80. As low as -88db. So now when i run ifconfig I get that wlan0 is up (Alfa) but eth0 is down (Intel(R) Wireless-N 7260). Code 7 normally means that you attempted to transfer data (in this case, your deauth) before associating with the AP. okay basically in at this stage you should see ~/wifichanges/wireless-regdb-2013.02.13#l highlighted in blue after you have